Chemicals

Part Description: Lucas Heavy Duty Oil Stabilizer 1Q/32oz Bottle: Increase oil life by 50%, stop dry starts, raises oil pressure, lower oil consumption and see an increase in miles per gallon, by reducing friction and wear. Lucas oil stabilizer is a pure petroleum that can blend with all oil including synthetic, ATF and mineral oil.

Part Description: Lucas Transmission Fix 24oz Bottle: Non-solvent formula that eliminates hesitation and stops slip in wore out transmissions and works as a sealer. No need to drain, just add to existing fluid level which helps in lowering transmission operating temperatures.

Part Description: Hapco Octane Booster 16oz Bottle: Octane booster is a safe to use treatment for all two and four cycle engines and converts gasoline into high-performance fuel. Can be also used in high compression, naturally aspirated super charged engines. Prevents damage from pre ignition all high torque and high load operations from race cars, boats, and motorcycles.

Part Description: Hapco Pro-Seal 8oz Bottle: Pro-Seal is a special formula that is non-clogging and will not harm seals. Designed to stop all leaks in main bearings, transmissions, power steering units, differentials, rack and pinion and any hydraulic fluid systems.

Part Description: Hapco Carburetor/Throttle Body Cleaner 17.5oz Aerosol Can: Eliminates no starts, rough starts, rough idling, and stalling by removing built up varnish and gumming. Improves fuel efficiency and does not harm protective coatings.

Part Description: Hapco Fuel Injector Cleaner 16oz Bottle: A special formula to help restore performance, reduce fuel emissions and stabilize fuel. Assists in removing combustion chamber deposits and stops surging, stalling and hesitation by cleaning fuel injectors. One bottle treats up to 25 gallons safely of gasoline, diesel, and marine engines.

Part Description: Hapco Engine Concentrate 16oz Bottle: A Multi-System treatment for all engine and fuel system types. Add to fuel to help clean and lubricates the entire system or add to the oil to remove harmful gum, varnish and carbon deposits. Compatible with synthetic and conventional oils and sensor safe without harm catalytic convertor.

Part Description: Hapco Slip Coat 16oz Bottle: Anti-wear oil additive that protects against heat and wear eliminating dry starts. Increases oil pressure and extends oil life. Cuts friction to a fraction!

Part Description: Hapco Rack and Pinion Formula 8oz Bottle: Anti-wear oil additive that protects against heat and wear that eliminates steering stiffness and steering noise. Compatible and safe with all power assisted hydraulic systems as well as with any type of power steering fluid.

Part Description: Hapco Main Sta 16oz Bottle: Main Sta is a specially 100% pure blend of natural and synthetic lubricants formulated to stop oil leaks in all engines by revitalizing and reconditioning the rubber on the seas. Helps in making new and rebuilt engines leakproof and prevents future leaks.

Part Description: Hapco Limited Slip Additive 4oz Bottle: Specially formulated additive creating an high pressure anti-wear resistance to eliminate limited slip wear and noise in differentials that can be used in any fluid type system.

Part Description: Johnsen's Chain & Cable Lube 10oz Aerosol Can: Johnsen's lube is a special formula of solvents and lubricants to keep chains and cables functioning during highest output. Can be used on low speed conveyors, drive chains, hoists, pulleys, rollers, garage doors, bushings, seals, O-rings and many other applications requiring lubrication.

Part Description: Hapco Cooling System Sealer 16oz Bottle: 15 minute easy to use formula used to seal leaks in head gaskets, radiators, heater cores, freeze plugs and blocks. Does not contain harmful flakes and mixes with all types of anti-freeze. Pour one bottle into the radiator, start the engine and let it idle for 15 mins or when leak stops.

Part Description: Hapco Fast Motor Flush 16oz Bottle: Formulated cleaning agent that helps restore engine performance by removing moisture, gum, carbon deposits and sludge. Cleans valves, lifters, and piston rings.

Part Description: Sea Foam 16oz Bottle: A specialized formula that can be used to both treat fuel and crankcase. When added to the gas tank Sea Foam cleans injectors as well as carburetors. It can be used in gas or diesel engines and stabilizes fuel up to 2 years. When added to the crankcase, intake valves and engine chambers will be cleaned of harmful deposits by liquefying them. When adding Sea Foam to the crankcase it will lubricate the upper cylinders and is safe with all types of oils that are conventional and synthetic.